Part Number Hot Search : 
A143E M65A3 2W10G 2SD1113 TC3588 82553350 2SK1549 003900
Product Description
Full Text Search
 

To Download 45WR5KLFTB Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MODEL 45
4mm Square High Resolution - 15 Turn Surface Mount Cermet Trimming Potentiometer
FEATURES AND BENEFITS
NEW PRODUCT
1
* High resolution * Space saving SMD design for the most compact board designs * Sealed to withstand aggressive water wash * Long life - set and forget construction * BI quality and reliability * Available in top and side adjustment versions, J-Hook or gull wing termination
ELECTRICAL
Standard Resistance Range, Ohms Standard Resistance Tolerance Input Voltage, Maximum Slider Current, Maximum Power Rating, Watts End Resistance, Maximum Actual Electrical Travel, Turns, Nominal Dielectric Strength Insulation Resistance, Minimum Resolution Contact Resistance Variation, Maximum
Fluorinert(R) is a registered trademark of 3M Company. Specifications subject to change without notice. Last update: 07/25/02.
10 to 2Meg 10% (<100 Ohms = 20%) 300 Vdc or rms not to exceed power rating 100mA or within rated power, whichever is less 0.25 at 85C derating to 0 at 150C 1% or 2 Ohms, whichever is greater 15 600Vrms 1,000 Megohms Essentially infinite 1% or 3 Ohms, whichever is greater
1-25
Model 45
ENVIRONMENTAL
Seal Temperature Coefficient, Maximum Operating Temperature Range Thermal Shock Moisture Resistance Shock, 6ms Sawtooth Vibration Rotational Life Load Life at 0.25 Watts Resistance to Solder Heat Temperature Exposure, Maximum Solderability
MECHANICAL
85C Fluorinert(R) (No Leaks) 100ppm/C (<100 Ohms = 250ppm/C) -65C to +150C 5 cycles, -65C to +150C (2% RT, 1% VR) Ten 24 hour cycles (2% RT, IR 10 Megohms Min.) 100G's (1% RT, 1% VR) 20G's, 10 to 2,000 Hz (1% RT, 1% VR) 200 cycles (3% RT, 1% CRV) 1,000 hours at 85C (2% RT, 1% CRV) 260C for 10 sec. (1% RT) 215C for 3 min. (1% RT) Per MIL-STD-202, Method 208
Mechanical Stops Torque, Starting Maximum Weight, Nominal
TOP ADJUSTMENT (Inch/mm) Model 45W
Solderable .008.003 3X Terminals .203.076 .100 2.54 (1) (2) .190 4.83
Clutch action, both ends 3 oz.-in. (0.021 N-m) .01 oz. (0.3 grams)
.025 3X .63
(3) .113 2.87 Metal Adjustment Screw .056/1.42 Dia. with .020/.51 wide x .015/.38 deep slot
.061 1.56
.200 5.08
.209 5.31
.022 .55
.138 .154 3.51 3.91 .063 1.60 .039 3X .99
STANDARD RESISTANCE VALUES, OHMS
10 20 50
100 200 500
1K 2K 5K
10K 20K 25K
50K 100K 200K
250K 500K 1Meg
2Meg
1-26
Model 45
SIDE ADJUSTMENT (Inch/mm)
Solderable .008.003 3X Terminals .203.076
Model 45J
3X .025 .63
1
(1)
.190 4.83 (2) .100 2.54 .113 2.87 Metal Adjustment Screw .056/1.42 Dia. with .020/.51 wide x .015/.38 deep slot .061 1.56
(3) .198 5.03 .180 4.57 .147 3.73 .032 .81
3X
Model 45G
3X
.025 .63 .100 2.54 (2) .120 3.05 Metal Adjustment Screw .056/1.42 Dia. with .020/.51 wide x .015/.38 deep slot .061 1.56 .229 5.82 .180 4.57 .154 3.91
(1)
.190 4.83
(3)
.008.003 3X .203.076 Solderable Terminals
.024 .61
SOLDER PAD LAYOUT (Inch/mm) Model 45W
.114 2.90 .051 2X 1.30 3X
Model 45J
.157 3.99 .079 2.01 3X .051 1.30
Model 45G
.205 5.21
.079 2.01
3X
.060 1.52
.100 2.54
.079 2.01
2X
.051 1.30
.090 2.29
.079 2.01
2X
.051 1.30
.090 2.29
1-27
Model 45
EXTENDED SHAFT OPTION (Inch/mm)
Available for all Model 45 pin styles: 45G, 45J, 45W
.018.007 0.46.18
Style 45JE shown.
PACKAGING
Standard: Embossed Tape & Reel All units oriented with #1 pin to the right of the direction of feed. 13" Reel G&J W 12 mm 16 mm 4 mm Pitch 4 mm Pitch 1,000 Units 1,000 Units 13" (330.2 mm) 7" Reel G&J W 12 mm 16 mm 4 mm Pitch 4 mm Pitch 500 Units 250 Units 7" (178 mm)
Tape
Reel Option:
Pin Style Width Sprocket Capacity Diameter
= = = =
Anti-Static Tubes All units oriented with #1 pin to same side. Magazine Capacity = 100 Units
1-28
Model 45
ORDERING INFORMATION
1
45 G R 10K LF XX* Model Series Pin Style Resistance Prefix Packaging Option: T7 = 7" Tape & Reel T13 = 13" Tape & Reel TB = Tubes RoHS Compliant Product Code - Optional Resistance Value
45 G E R 10K LF XX* Model Series Pin Style E = Extended Shaft Option
* Packaging option must be specified.
1-29
Model 45


▲Up To Search▲   

 
Price & Availability of 45WR5KLFTB

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X